LATTICE SEMICONDUCTOR  LC4256ZE-P-EVN  Development Kit, IspMACH 4000Ze, Pico, USB, CPLD, High-Side Current Sensor Circuits

Technical Data Sheet (1.03MB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The LC4256ZE-P-EVN is a development kit for ispMACH 4256ZE-MN144 CPLD. The Pico evaluation board is small but packed with features to help evaluate the use of the ispMACH 4000ZE CPLD. The on board LC4256ZE is the highest capacity of the family with 256 macrocells. The 144 pin csBGA package provides 108 user I/Os and four dedicated inputs in a 7mm x 7mm package. The LC4256ZE consumes standby current as low as 15μA. CPLDs are ideal for glue logic, level shifting between signal standards, and providing additional interfaces for I/O limited microprocessors. On board power monitoring circuits with the POWR6AT6 device provide a convenient way to monitor power consumption of the CPLD. A USB cable programming interface allows you to modify the CPLD programming from any PC host. And by using ispLEVER classic and ispVM software we can compile our own designs captured as VHDL, Verilog HDL, or schematics.
  • Power manager II device (ispPAC-POWR6AT6-01SN32I)
  • Pre programmed Pico power demo
  • USB mini jack socket for power, JTAG programming, and I2C interface
  • 2X15 header landing for off board expansion
  • Push button for global reset
  • 4bit DIP switch
  • 3.3V and 2.5V supply rails
  • Current and voltage sensor circuits
  • Battery or USB power source
The evaluation board can be damaged without proper anti static handling.
The evaluation board must be stored between -40°C and 100°C. The recommended operating temperature is between 0°C and 90°C.

Product Information

Silicon Manufacturer:
Lattice Semiconductor
Accessory Type:
Core Architecture:
For Use With:
Core Sub-Architecture:
Silicon Core Number:
Silicon Family Name:
No. of Bits:
Kit Contents:
Evaluation Board, USB Connector Cable. Quick Start Guide
Product Range:
High-Side Current Sensor Circuits
To Be Advised

Find similar products  grouped by common attribute


  • Portable Devices


IspMACH 4000ZE Pico evaluation board with LC4256ZE-5MN144C device, USB connector cable, Quick start guide.


The evaluation board must be stored between -40°C and 100°C. The recommended operating temperature is between 0°C and 90°C.

Legislation and Environmental

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.