Low

MCP47FEB21A0-E/ST - 

Digital to Analog Converter, 12 bit, 3.4 MSPS, Differential, 1.8V to 5.5V, TSSOP, 8 Pins

Image is for illustrative purposes only. Please refer to product description.

Manufacturer:
MICROCHIP MICROCHIP
Manufacturer Part No:
MCP47FEB21A0-E/ST
Newark Part No.:
62X0557
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
1.8V to 5.5V
:
3.4MSPS
:
TSSOP
:
-40°C
:
-
:
Each
:
125°C
:
12bit
:
8Pins
:
Differential
:
I2C
:
-
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The MCP47FEB21A0-E/ST is a 12-bit buffered voltage output Digital-to-analog Converter (DAC) with nonvolatile memory and an I²C serial interface. The VREF pin, the device VDD or the internal band gap voltage can be selected as the DAC reference voltage. When VDD is selected, VDD is connected internally to the DAC reference circuit. When the VREF pin is used, the user can select the output buffer gain to be 1 or 2. When the gain is 2, the VREF pin voltage should be limited to a maximum of VDD/2. This device has a 2-wire I²C-compatible serial interface for standard, fast or high-speed modes.
  • Rail-to-rail output
  • Fast settling time of 6µs
  • External VREF pin
  • Internal band-gap
  • Nonvolatile memory
  • Auto recall of saved DAC register setting
  • Auto recall of saved device configuration
  • Power-on/brown-out reset protection
  • Nonvolatile memory write protect (WP) bit
  • Disconnects output buffer
  • Selection of VOUT pull-down resistors
  • Low power consumption
  • Power-down operation - 650nA typical
  • EEPROM write cycle

Applications

Sensing & Instrumentation, Automation & Process Control, Computers & Computer Peripherals, Motor Drive & Control

Associated Products

Compare Selected