Low

LPC1778FET208,551 - 

ARM Microcontroller, ARM Cortex-M3, 32bit, 120 MHz, 512 KB, 96 KB, 208 Pins

NXP LPC1778FET208,551

Image is for illustrative purposes only. Please refer to product description.

Manufacturer:
NXP NXP
Manufacturer Part No:
LPC1778FET208,551
Newark Part No.:
41T4094
Product Range
LPC1700 ARM Cortex-M3 Microcontrollers
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
165I/O's
:
32bit
:
120MHz
:
Each
:
208Pins
:
ARM Cortex-M3
:
CAN, I2C, SPI, SSP, USB, UART
:
TFBGA
:
2.4V
:
512KB
:
LPC1700 ARM Cortex-M3 Microcontrollers
:
3.6V
:
96KB
:
MSL 2 - 1 year
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The LPC1778FET208,551 is a 32-bit Microcontroller based on ARM Cortex-M3 core with RISC architecture operates at a maximum frequency of 120MHz. The ARM Cortex-M3 is a next generation core that offers better performance than the ARM7 at the same clock rate and other system enhancements such as modernized debug features and a higher level of support block integration. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and has a Harvard architecture with separate local instruction and data buses, as well as a third bus with slightly lower performance for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branches. The device adds a specialized flash memory accelerator to accomplish optimal performance when executing code from flash. The device incorporates 512kB internal flash, 96kB internal RAM, 4kB EEPROM and 165 general-purpose I/O pins.
  • ARM Cortex-M3 built-in nested vectored interrupt controller (NVIC)
  • Multilayer AHB matrix interconnect
  • Split APB bus
  • Cortex-M3 system tick timer, including an external clock input option
  • Standard JTAG test/debug interface as well as serial wire debug and serial wire trace port options
  • Embedded trace macrocell (ETM) module supports real-time trace
  • Boundary scan for simplified board testing
  • Non-maskable Interrupt (NMI) input
  • LCD controller - Supporting both super-twisted nematic (STN) & thin-film transistors (TFT) displays
  • External memory controller (EMC)
  • 8-channel General purpose DMA controller (GPDMA)
  • Ethernet MAC with MII/RMII interface and associated DMA controller
  • USB 2.0 Full-speed dual-port device/host/OTG controller
  • SD/MMC memory card interface
  • Windowed watchdog timer (WWDT)
  • Four reduced power modes - Sleep, deep-sleep, power-down and deep power-down
  • Wake-up interrupt controller (WIC)
  • Processor wake-up from power-down mode
  • Brownout detect with separate threshold for interrupt and forced reset
  • On-chip power-on reset (POR)

Applications

Communications & Networking, Industrial, Medical, Automation & Process Control, HVAC, Consumer Electronics, Automotive, Audio, Embedded Design & Development, Motor Drive & Control

Associated Products