Low

NXP  LPC2364HBD100,551  32 Bit Microcontroller, ARM7TDMI, 72 MHz, 128 KB, 34 KB, 100 Pins, LQFP

NXP LPC2364HBD100,551
Technical Data Sheet (399.69KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The LPC2364HBD100,551 is a 16-/32-bit Microcontroller based on ARM7TDMI-S core with RISC architecture operates at a maximum frequency of 72MHz. A 128-bit wide memory interface and an unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 % over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The device incorporates 128kB internal flash, 34kB internal RAM, 8-channel 10-bit A/D converter, 10-bit D/A converter, an Ethernet, four 32-bit timers and real-time clock (RTC) and 70 general-purpose I/O pins. This device also features peripherals like four UARTs, three inter-integrated circuit (I2C), one serial peripheral interface (SPI) modules and one integrated interchip sound (I2S).
  • Dual Advanced high-performance bus (AHB) system
  • Advanced vectored interrupt controller (VIC)
  • General purpose DMA controller (GPDMA)
  • Ethernet MAC with associated DMA controller
  • USB 2.0 full-speed device with on-chip PHY and associated DMA controller
  • CAN controller with two channels
  • SD/MMC memory card interface
  • 70 General purpose I/O pins with configurable pull-up/down resistors
  • PWM/timer block with support for three-phase motor control
  • Real-time clock (RTC) with separate power pin
  • 2KB SRAM powered from the RTC power pin
  • Watchdog timer (WDT)
  • Standard ARM test/debug interface for compatibility with existing tools
  • Emulation trace module supports real-time trace
  • Four reduced power modes - Idle, sleep, power-down and deep power-down
  • Processor wake-up from power-down mode via any interrupt able to operate during power-down mode
  • Two independent power domains allow fine tuning of power consumption based on needed features
  • Each peripheral has its own clock divider for further power saving
  • Brownout detect with separate thresholds for interrupt and forced reset
  • On-chip power-on reset

Product Information

Architecture:
ARM7TDMI
CPU Speed:
72MHz
Program Memory Size:
128KB
RAM Memory Size:
34KB
No. of Pins:
100Pins
MCU Case Style:
LQFP
No. of I/O's:
70I/O's
Embedded Interface Type:
CAN, I2C, I2S, SPI, UART, USB
Supply Voltage Min:
3V
Supply Voltage Max:
3.6V
Packaging:
Each
Product Range:
LPC ARM7 Microcontrollers
Automotive Qualifications Standard:
-
MPU Core Size:
16bit / 32bit
MSL:
MSL 3 - 168 hours
Peripherals:
ADC, DAC, PWM, Timer
Operating Temperature Min:
-40 °C
Operating Temperature Max:
125 °C
SVHC:
No SVHC (17-Dec-2015)
Controller Family/Series:
LPC2300

Find similar products  grouped by common attribute

Applications

  • Automation & Process Control;
  • Industrial;
  • Medical;
  • Communications & Networking

Legislation and Environmental

Moisture Sensitivity Level:
MSL 3 - 168 hours
Product Traceability
RoHS Compliant:
Yes
Authorized Distributor