ADM485JNZ

ADM485 is a differential line transceiver. It is suitable for high speed bidirectional data communication on multipoint bus transmission lines. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver can be enabled independently. When disabled, the outputs are three-stated. It is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against ESD; all driver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up. This transceiver is widely used in application such as low power RS-485 systems, DTE/DCE interface, packet switching, local area networks (LNAs), data concentration, data multiplexers, integrated services digital network (ISDN) etc.

• Input current is 1mA at (VIN = 12V)
• Data rate is 5Mbps, upto 32 transceivers can be connected simultaneously on a bus
• Single supply voltage is 5V, receiver contains fail-safe feature results in logic high output state
• Bus common-mode range is –7V to +12V
• Thermal shutdown protection
• Short-circuit protection
• Driver propagation delay is 10ns typical, superior upgrade for LTC485
• Receiver propagation delay is 15ns typical, high-Z outputs with power off
• Operating temperature range is 0°C to 70°C
• Packaging style is 8-lead PDIP

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party