You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
FT245RQ-REEL
Interface Bridges, USB to FIFO, 1.8 V, 5.25 V, QFN, 32 Pins, -40 °C
- Manufacturer:
- FTDI FTDI
- Manufacturer Part No:
- FT245RQ-REEL
- Newark Part No.:
- 91K9921
- Technical Datasheet:
- FT245RQ-REEL Datasheet
Product Overview
The FT245RQ is an USB to parallel FIFO Interface IC, simplifies USB to FIFO designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operate efficiently with a USB host controller by using as little as possible of the total USB bandwidth available. The USB to parallel FIFO interface integrated circuit with the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to parallel designs using the IC have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device. The IC adds a new function compared with its predecessors, effectively making it a 2-in-1 chip for some application areas. A unique number is burnt into the device during manufacture and is readable over USB.
- Single chip USB to parallel FIFO bidirectional data transfer interface
- Entire USB protocol handled on chip, no USB-specific firmware programming required
- Simple interface to MCU/PLD/FPGA logic with simple 4-wire handshake interface
- Data transfer rate to 1Mbps D2XX direct drivers
- Data transfer rate to 300kbps VCP drivers
- FTDI's royalty-free virtual com port (VCP) and direct (D2XX) drivers
- New USB FTDIChip-ID™
- FIFO receive and transmit buffers for high data throughput
- 256-byte receive buffer and 128-byte transmit buffer utilising buffer smoothing technology
- Adjustable receive buffer timeout
- Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes
- Integrated 1024-bit internal EEPROM for storing USB VID, PID, serial number/product desc. strings
- Device supplied pre-programmed with unique USB serial number
- Support for USB suspend/resume through PWREN# pin and wake up pin function
- In-built support for event characters
- Support for bus powered, self powered and high-power bus powered USB configurations
- Integrated 3.3V level converter for USB I/O
- Integrated level converter on FIFO interface and control pins for interfacing to 5 to 1.8V logic
- True 5/3.3/2.8/1.8V CMOS drive output and TTL input
- High I/O pin output drive option
Applications
Computers & Computer Peripherals, Consumer Electronics, Sensing & Instrumentation, Industrial, Automation & Process Control
Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- USB to FIFO
- :
- 1.8V
- :
- 5.25V
- :
- QFN
- :
- 32Pins
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
Technical Documents (1)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Best Seller
Available for back order
More stock available to supplier lead times which is approximately 04/03/24
×
57
You can reserve stock now just order your desired quantity and checkout as normal. The quantity that cant be dispatched now will be placed on back order and sent as soon as we get a delivery from our supplier. You only get charged when the products are dispatched to you.
Delivery in 2-4 business days
(UK Stock)
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
$9.76
Pricing is unavailable. Please contact customer services.
- Price for:
- Each (Supplied on Cut Tape)
Multiple: 1 Minimum: 1
| Quantity | Price | Your Price |
|---|---|---|
| 1+ | $9.76 | |
| 10+ | $8.87 | |
| 50+ | $8.43 | |
| 100+ | $8.04 | |
Pricing is unavailable. Please contact customer services.
Filter Tool