You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
SM351LT
Magnetoresistive Sensor IC, Nanopower Series, 7 G, SOT-23, -0.5 to 6 V
- Manufacturer:
- HONEYWELL HONEYWELL
- Manufacturer Part No:
- SM351LT
- Newark Part No.:
- 51X2485
- Technical Datasheet:
- SM351LT Datasheet
Product Overview
The SM351LT is a Nanopower series magnetoresistive (MR) sensor IC in 3 pin SOT-23 package. This ultra sensitive device is designed to accommodate wide range of applications with large air gaps, small magnetic fields and low power requirements. The sensor IC responds to either north or south pole applied in a direction parallel to sensor. The SM351LT does not require magnet polarity to be identified by simplifying installation and potentially reducing system cost. This sensor uses very low average current consumption and push pull output which does not require a pull up resistor. It can operate from low supply voltage of 1.65V and is energy efficient.
- High sensitivity of 7G (typical) and 11G (maximum)
- Average current of 360nA
- Supply voltage range from 1.65VDC to 5.5VDC
- Omni-polar sensing, activates with either pole from magnet
- Operating temperature range from -40°C to 85°C (-40°F to 185°F)
- Push pull output, does not require external pull up resistor
- Non chopper stabilized design
Applications
Sensing & Instrumentation, Consumer Electronics, Portable Devices, Industrial, Medical
Footnotes
Do not use this product as safety or emergency stop device or in any other application where failure of product could result in personal injury.
Warnings
Electrostatic sensitive device (ESD), do not open or handle except at static work station.
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- Anisotropic Magneto Resistive (AMR)
- :
- Omnipolar Switch
- :
- 1.65V
- :
- 5.5V
- :
- 3Pins
- :
- SOT-23
- :
- -40°C
- :
- 85°C
- :
- -
Technical Documents (2)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
0 In stock
Non-Cancelable / Non Returnable
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
$1.48
Pricing is unavailable. Please contact customer services.
- Price for:
- Each (Supplied on Cut Tape)
Multiple: 3000 Minimum: 3000
Filter Tool