KIT33912G5DGEVME

KIT33912G5DGEVME is a LIN system basis chip with DC motor pre driver and current sense evaluation kit. The evaluation kit utilizes a USB dongle interface board in support of the 33912, which is a serial peripheral interface (SPI) controlled system basis chip (SBC), combining many frequently used functions in an MCU based system, plus a Local Interconnect Network (LIN) transceiver. The 33912 has a 5V to 50mA low dropout regulator with full protection and reporting features. The device provides full SPI readable diagnostics and a selectable timing watchdog for detecting errant operation. The LIN Protocol Specification 2.0 and 2.1 ('G5AC) compliant LIN transceiver has waveshaping circuitry that can be disabled for higher data rates. Two 60mA high side switches and two 160mA low side switches with output protection are available for driving resistive and inductive loads. All outputs can be pulse width modulated (PWM).

• Full duplex SPI interface at frequencies up to 4MHz
• LIN transceiver capable of up to 100kbps with wave shaping
• Two 60mA high side and two 160mA low side switches
• Four high voltage analog/logic inputs
• Configurable window watchdog
• 5V low drop regulator with fault detection and low voltage reset (LVR) circuitry
• Current sense module
• Switched/protected 5V output (used for hall sensors)
• USB dongle board interface to SPI port of MC33910, MC33911 and MC33912

Contents

33912G5 evaluation board, USB-SPI dongle board, 16 wire ribbon cable, CD33912G5DG.