RU-BNF

The RU-BNF modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations. The RU-BNF is an RDL Format-A sender/receiver that connects to a Dante-enabled network, providing all the features of an RDL RU-FN Format A to Network Interface and an RU-NFD Network to Format-A Interface/Distributor.

• Digital Audio Ethernet Protocol:Dante
• Transmission Rate:100 Mbps
• Sample Rates Supported:44.1 kHz, 48 kHz (default)
• Bit Depth Supported:24 bits
• Audio Operating Levels:-18 dBFS = +4 dBu
• Format-A to Network Interface Section, Format-A Input:RDL Format-A RJ45, Format-A Signal Pairs Used (3):A, B, C
• Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
• THD+N: 90 dB (50 Hz to 120 Hz, any input pair)
• Crosstalk: 18 dB
• AUX Input, Input:Balanced, detachable terminal block, Input Impedance:> 20 kO, Input Level for +4 dBu:-16 dBu to +12 dBu, +22 dBu maximum
• Frequency Response:20 Hz to 20 kHz (± 0.75 dB)
• THD+N: 60 dB (50 Hz to 120 Hz)
• Crosstalk: 18 dB
• Network to Format-A Interface/Distributor Section, Format-A Outputs:RDL Format-A RJ45 (3), Format-A Signal Pairs Used (3):A, B, C (each Format-A output)
• Frequency Response:20 Hz to 20 kHz (± 0.75 dB)
• THD+N: 18 dB
• AUX Output
• Output:Balanced, detachable terminal block, Output Level:+4 dBu (nominal), Output Impedance:150 O balanced; 75 O unbalanced
• Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
• THD+N: 18 dB
• Indicators (18):Power In (1); Power Out (4); Audio Signal LEDs (7); AUX Dual-LED VU Meter (2); Network Sys and Sync (2), Ethernet Link and Speed (2)
• Power Connections (2):Power Jack; Detachable Terminal Block
• Ambient Operating Environment:0° C to 40° C
• Power Requirement:24 Vdc @ 150 mA plus connected loads.
• Dimensions:5.8" x 1.7" x 5.2", Weight:1.46 lbs.