PIZ-CONNECT

The PiZ-EzConnect allows connection to any Raspberry Pi header pins via a terminal block. Like the Pi-EzConnect board, PiZ-EzConnect conforms to the Pi Zero dimensions. PiZ-EzConnect exposes the 40-pin header available on a Raspberry Pi. All odd numbered pins are accessible via terminal blocks Pins 2, 4 and 6 are exposed via a terminal block as those pins provide Power and Ground. Other even numbered pins are left to the discretion of the user. A male header block is included for Pi Zero or Pi Zero W users. PiZ-EzConnect can be used wherever the Pi-EzConnect is used. The compact form factor makes it convenient for use with Pi Zero, Pi Zero W, Pi 2, Pi 3 or other Raspberry Pi clones conforming to the Pi-HAT standards. These include OrangePi, Asus Tinker Boards and other boards. Additional terminal blocks can be added to PiZ-EzConnect board. These terminal blocks are standard 3.5mm terminal blocks (3.5mm is the distance between the pins). These terminal blocks are readily available from any electronic component supply places. Using a PiZ-EzConnect board, it is possible to connect multiple sensors and other electronic devices / components to multiple GPIOs on a Raspberry Pi. With PiZ-EzConnect, you can leverage the full capability of a Raspberry Pi.

• Exposes Raspberry Pi Zero headers with easy to connect terminal-blocks.
• Solderless and secure connections for all GPIO’s via terminal blocks.
• Power and Ground are marked. 3.3V, 5V power terminalblocks are presoldered.
• Power connections - 5V, 3.3V and ground connections.
• Fits Pi Zero, Pi Zero W, Pi 2, Pi 3 or other Pi clones (e.g. Asus, OrangePi) with 40 pin headers.
• Compact footprint.
• Fully documented pins.
• Includes male headers for Pi Zero and two additional 2-port terminal blocks for additional connections.
• Terminal blocks can be soldered on bottom layer as well as top layer.