AS5600-SO_EK_AB

AS5600-SO_EK_AB is an adapter board which allows an easy and fast evaluation of the AS5600 rotary magnetic position sensor in the lab or together with an existing system. This small factor board is fully assembled with AS5600 position sensor and its necessary external components. All relevant signals are available on a dual-row 2.54mm 4-pin header footprint and can be easily wired to an existing application. The AS5600 is a programmable Hall-based rotary magnetic position sensor with a high-resolution 12bit analog or PWM output for contactless potentiometers. Based on planar Hall technology, this device measures the orthogonal component of the flux density (Bz) from an external magnet while rejecting stray magnetic fields. The default range of the output is 0 to 360 degrees, but the full resolution of the device can be applied to smaller range by programming a zero angle (start position) and maximum angle (stop position).

• I²C interface is used for configuration and user programming of non-volatile parameters in AS5600
• Additionally the device can be programmed in 3-wire mode without any programmer

Contents

AS5600-SO-EK-AB adapter board, AS5000-MD6H-1 reference magnet.