LTC6433BIUF-15#PBF

LTC®6433-15 is a gain-block amplifier with excellent linearity at frequencies below 100KHz to beyond 1000MHz and with low associated output noise. The unique combination of high linearity, low noise and low power dissipation makes this an ideal candidate for many signal-chain applications. It is easy to use, requiring a minimum of external components. It is internally input/output matched to 50 ohm and it draws only 95mA from a single 5V supply. While this device is not capable of DC coupled operation, users can define the low frequency cut-off by appropriate choice of external components. On-chip bias and temperature compensation maintain performance over environmental changes. It uses a high performance SiGe BiCMOS process for excellent repeatability compared with similar GaAs amplifiers. Typical applications are single-ended IF amplifier, ADC driver, CATV, test equipment.

• 100KHz to 1GHz flat gain from a single demo circuit, low frequency cutoff is user defined
• 50 ohm single-ended operation, insensitive to VCC variation
• Input/output internally matched to 50 ohm, single 5V supply, unconditionally stable
• Operating supply range from 4.75 to 5.25V (TA=25°C, VCC=5V, ZSOURCE=ZLOAD=50 ohm)
• Total supply current is 95mA typ (All VCC Pins Plus OUT, TA=25°C, VCC=5V, ZSOURCE=ZLOAD=50 ohm)
• –3dB bandwidth is 2000MHz typ (de-embedded to package (low frequency is user defined)
• Diode temperature coefficient is 1.4mV/°C typ (TA=25°C, VCC=5V, ZSOURCE=ZLOAD=50 ohm)
• Current to VCC pin is 16mA max (either VCC pin may be used,TA=25°C, VCC=5V, ZSOURCE=ZLOAD=50 ohm)
• 24-lead plastic QFN package
• Temperature rating range from -40°C to 85°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party