LTC7060IMSE#WTRPBF

LTC7060 drives two N-channel MOSFETs in a half-bridge configuration with supply voltages up to 100V. Both high-side and low-side drivers can drive the MOSFETs with a different ground reference, providing excellent noise and transient immunity. Its powerful 0.8ohm pull-down and 1.5ohm pull-up MOSFET drivers allows the use of large gate capacitance high voltage MOSFETs. Additional features include UVLO, three state PWM input, adjustable turn-on/-off delays and shoot-through protection. Applications include automotive and industrial power systems, telecommunication power systems, half-bridge and full-bridge converters.

• Unique symmetric floating gate driver architecture, AEC-Q100 qualified for automotive applications
• High noise immunity, tolerates ±10V ground difference between input and output grounds
• 100V maximum input voltage independent of IC supply voltage VCC
• 6V to 14V VCC operating voltage, 4V to 14V gate driver voltage
• 0.8ohm pull-down, 1.5ohm pull-up for fast turn-on/off
• Adaptive shoot-through protection, programmable dead-time
• Three-state PWM input with enable pin, VCC UVLO/OVLO and floating supplies UVLO
• Drives dual N-channel MOSFETs, open-drain fault indicator
• Shoot-through protection, 115V absolute max voltage, 5.3V VCC falling UVLO
• 12-lead plastic MSSOP package, -40°C to 125°C temperature range

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party