MAX20043FGEEB/V+

MAX20043FGEEB/V+ is an automotive hi-speed USB 2.0 protector. It provides high ESD and short-circuit protection for the low-voltage internal USB data and USB power line in automotive radio, navigation, connectivity, and USB hub applications. The short-circuit protection features include short-to battery on the protected HVBUS, HVD+, and HVD outputs, as well as short-to-HVBUS on the protected HVD+ and HVD- outputs. This device is capable of a short-to-battery condition of up to +18V. Short-to-GND protection and overcurrent protection are also provided on the protected HVBUS output to protect the internal BUS power rail from an overcurrent fault. This device features high ESD protection to ±15kV air gap and ±8kV contact on the protected HVBUS, HVD+, and HVD- outputs. It is used in automotive USB protection application.

• Short-to-battery and short-to-GND protection on protected HVBUS output
• Short-to-battery and short-to-BUS protection on protected HVD+ and HVD- outputs
• Tested to ISO 10605 and IEC 61000-4-2 ESD standards, AEC-Q100 qualified
• Power-supply voltage range (BUS) from 4.75V to 5.5V
• Input current (BUS) is 400µA maximum at ((VBUS = 5.0V VIN = +3.3V, TJ = TA = -40°C to +105°C)
• On-resistance is 51mohm typical at (VBUS = 5.0V VIN = +3.3V, TJ = TA = -40°C to +105°C)
• Propagation delay is 200ps typical at (RL = RS = 50 ohm, VBUS = 5.0V VIN = +3.3V)
• HVBUS off-leakage current is 750µA maximum at (VHVBUS = 18V, VBUS = 4.75V)
• Operating temperature range from -40°C to +105°C
• 16-pin QSOP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party