80K-6 CAL D

The 80K-6 CAL D from Fluke is a high voltage probe. This probe is designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000V peak AC or DC overvoltage category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. It provides high accuracy when used with a voltmeter having 10Megohm input impedance. The divider also provides high accuracy when used with a voltmeter having 10megohm input impedance. A moulded plastic body houses divider and protects the user from the voltage being measured. The 80K-6 will achieve rated accuracy when it is used with an AC/DC voltmeter having 0.25% accuracy or better. It is approved by CAN/CSA C22.2 No. 1010.2.031-94 & IEC 1010-2-031:1993, type B, 6KVDC or peak AC, 4.24KV rms AC, overvoltage cat. I (voltage derived from limited energy transformers).

• Calibrated with data high voltage probe
• Allows a multimeter to measure up to 6,000V, intended for low energy applications only
• Voltage range from 0 to 6KV DC or peak AC
• Input impedance of 75Mohm nominal
• Accuracy of ±1% (DC to 500Hz), ±2% (500 to 1KHz), -30% at 10KHz (above 1KHz, output reading falls)
• Operating temperature range from 0 to 50°C and temperature coefficient of 100ppm/C
• Dimension is 24.89cm (9.8inch) (probe body), 5.10cm (2.0in) maximum width and weight is 12.7g (45oz)
• 1000:1 voltage divider provides the probe with a high input impedance

Applications

Test & Measurement

Warnings

Do not use this probe to measure high voltages on power distribution systems.

Notes

When making a measurement, never make body contact with the probe tip or the red portion of the probe. Always hold the probe by its black handle.