FLK-3000 FC CAL DU

The FLK-3000 FC CAL DU from Fluke is a true rms wireless multimeter with Fluke Connect app and ShareLive video call support. With its precision, reliability and ease of use, the Fluke 3000 FC wireless multimeter is the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features users need to troubleshoot and repair many problems in electrical and electronic systems. It gives true rms voltage and current measurements, 6000 count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 3000 FC provides higher 0.09% basic accuracy, digital display showing up to three secondary measurements from remote modules and bright white backlight. It complies with ANSI/ISA 61010-1 / (82.02.01): 3rd edition, CAN/CSA-C22.2 No 61010-1-12: 3rd edition, UL 61010-1: 3rd edition, IEC/EN 61010-1:2010.

• Calibrated with data and uncertainties wireless multimeter
• 600.0mV to 1000V AC and DC voltage, 600.0 ohm to 50.00Mohm resistance, 2.000V diode test
• 60.00mA to 400.0mA AC and DC current, 99.99Hz to 99.99KHz frequency, 1000nF to 9999μF capacitance
• ANSI/ISA 61010-1 / (82.02.01), CAN/CSA-C22.2 No 61010-1-12, UL 61010-1, IEC/EN 61010-1:2010
• MIN/MAX recording, IP54 rated, pollution degree 2, certified by CSA, FCC, CE
• Provides work safely near electrical panels while wearing less PPE
• 1000VDC or AC RMS maximum voltage between any terminal and earth ground
• Three AA alkaline batteries (NEDA 15A IEC LR60) with 250hour battery life
• 2.4GHZ ISM band RF communications
• 4.75cm x 9.3cm x 20.7cm size (H x W x L), 340g weight, -10°C to 50°C operating temperature

Applications

Test & Measurement

Contents

Fluke 3000 FC wireless multimeter, True rms wireless multimeter, TL175 test leads, AC175 alligator clips.

Warnings

Do not touch voltages <gt/>30VAC rms, 42VAC peak or 60VDC.

Notes

Use only correct measurement category (CAT), voltage and amperage rated probes, test leads and adapters for the measurement.