MAX118CPI+

The MAX118CPI+ is a +5V, 1Msps, 8-channel, 8bit analogue to digital (ADC) converter with 1µA power down in 28 pin DIP package. It operate from a single supply and use a half-flash technique to achieve a 660ns conversion time (1Msps). The microprocessor (µP) interfaces are simplified because the ADC can appear as a memory location or I/O port without external interface logic. The data outputs use latched, three-state buffer circuitry for direct connection to an 8bit parallel µP data bus or system input port. A power-down (PWRDN - complementary) pin reduces current consumption typically to 1µA. The device return from power-down mode to normal operating mode in less than 200ns, allowing large supply current reductions in burst-mode applications (in burst mode, the ADC wakes up from a low power state at specified intervals to sample the analogue input signals). it include a track/hold, enabling the ADC to digitize fast analogue signals.

• Supply voltage range is 4.75V to 5.25V
• Operating temperature range from 0°C to 70°C
• Low power of 40mW (operating mode) and 5µW (power-down mode)
• Total unadjusted error ≤1LSB
• No external clock required
• Internal track/hold feature
• Full power bandwidth of 1MHz
• Internally connected 8th channel monitors reference voltage
• Communication Systems; High-Speed DSP; Portable Equipment; Remote Data Acquisition

Applications

Signal Processing, Portable Devices, Communications & Networking

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party