You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
ATAVRSB200
Development Kit, SB200 Gateway(USB1287), Battery Management
- Manufacturer:
- MICROCHIP MICROCHIP
- Manufacturer Part No:
- ATAVRSB200
- Newark Part No.:
- 71T6901
- Technical Datasheet:
- ATAVRSB200 Datasheet
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- Atmel
- :
- 8bit
- :
- ATmega
- :
- AVR
- :
- megaAVR
- :
- ATMEGA16HVB
- :
- Dev Board SB20X, SB200 Gateway(USB1287)
- :
- -
Technical Documents (3)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Product Overview
ATAVRSB200 is a development platform for SB20x smart battery reference designs, which offers an easy way to start evaluation and hence development of smart battery applications using AVR microcontrollers. The SB200 is not in itself a reference design, but is intended to be used with e.g. SB201-1, which is a reference design that demonstrates implementation of a single cell smart battery (Li ion). 16340/CR123A battery cells can be inserted in the SB200 battery sockets, and a SB20x is inserted in the dedicated daughter board socket. This forms a “battery pack” with a given number of cells, safety protection and full battery capacity monitoring capabilities. Alternately other cell types can be soldered into the SB200. To simulate the use of the “battery pack” the SB200 features a Charger that can charge the battery pack, and a Constant Current Load that can simulate an application that draws power from the battery pack.
- Programmable charger and loader
- Communication gateway between PC and smart battery
- Full evaluation of smart battery reference design
- Socket for SB20x smart battery reference designs
- Battery charger with up to 19V and 2A
- Auto limitation of charging voltage and current
- Auto termination of charging when charging period expires
- Adjustable constant current Load for battery discharging
- Adjustable constant current Load for battery discharging
- Battery charger: charges up to 19V & 2A, auto-limitation of charging, auto-termination of charging
Contents
AVRSB200 evaluation-board, USB cable, Power cable, Four 16340 cells.
Footnotes
The SB200 will limit the temperature to approximately 125°C by turning off the load if the temperature rises above this point.
Warnings
Be aware that the heat sinks of the Constant Current Load can get very hot. The shunt resistors (0.5ohm) at the load and from the charger will also get very hot. Do not touch them.
Best Seller
0 In stock
Non-Cancelable / Non Returnable
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
$357.15
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 1 Minimum: 1
Filter Tool