MK64FN1M0VMD12

The MK64FN1M0VMD12 is a 32-bit Kinetis K6x Microcontroller with Ethernet crypto, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 120MHz. The device incorporates 1024kB internal flash, 256kB internal RAM, two 16-bit SAR A/D converter, two 12-bit D/A converter and 100 general-purpose I/O pins. This device also features communication interfaces like six UART modules, three SPI modules, three I2C modules and one I2S module.

• ARM Cortex-M4 core with DSP instructions and floating point unit
• FlexBus external bus interface
• Multiple low-power modes, low-leakage wake-up unit
• Memory protection unit with multi-master protection
• 16-channel DMA controller
• External watchdog monitor and software watchdog
• Hardware CRC module
• Hardware random-number generator
• Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1 and SHA-256 algorithms
• 128-bit Unique identification (ID) number per chip
• Three analog comparators (CMP)
• Ethernet controller with MII and RMII interface
• USB Full-/low-speed On-the-Go controller
• Controller area network (CAN) module
• Secure digital host controller (SDHC)
• Two 8-channel Flex-timers (PWM/motor control)
• Two 2-channel Flex timers (PWM/quad decoder)
• IEEE 1588 timers
• 32-bit PITs and 16-bit low-power timers
• Real-time clock
• Programmable delay block
• 3 to 32MHz and 32kHz Crystal oscillator
• PLL, FLL and multiple internal oscillators
• 48MHz Internal reference clock (IRC48M)

Applications

Industrial, Communications & Networking