CPK1000IL2.

CPK1000IL2 is a cable and power test kit combines the high performance Real World Certifier (with 250 report storage) with a Power Panel CAT5/6 DVM Tester to thoroughly test cables and devices plus determine exactly what is on your CAT 5/6 network. And, if you work with PoE, you can test for voltage and operation of your PoE voltage source. The RWC1000K2 Real World Certifier is the ideal tester for UTP Cables and LAN devices and performs all standard cable tests, including cable propagation delay, skew, attenuation, cable verification, opens, shorts, split pairs, and splits distance The RWC1000K2 performs real speed tests on cables, switches, hubs, and PCs; it furthermore carries out basic testing for coax cables. Once connected, the POE1000IL Power Panel goes to work scanning each pin on a connector and displaying both the activity and the pair location. Whether it be network devices, phones or Power over Ethernet, all is displayed. And, if you are a VoIP phone of IP camera installed.

• Scan all pins to locate the active devices and voltage on the Ethernet cable or port
• Display the speed (10MB,100MB,1GB), duplex (full or half) and pinouts of the devices
• Display the PoE voltage and pinouts – mid-span, end-span or all pairs (if PoE is present)
• Measure the negotiated speed of the devices when connected
• Power pass thru - two jacks allow PoE power to be passed to the PoE device so it can be tested
• Measure watt draw of the PoE device
• Power panel can remain inline between 2 devices without affecting communication for long monitoring
• Connect to any device with an Ethernet plug—computer, switch, IP phone, IP camera or access point
• Works with CAT3, 5, 6, 6a, 7 & 8 UTP and STP, measures up to 75V/99W across all four pairs
• VoIP phone and IP camera load simulator, built-in tone generator

Contents

Power panel digital volt meter & LAN/cable certifier, Remote unit, CAT6 RJ45 patch cable(2), RJ45 to Coax adapter, USB cable, inductive probe to audibly trace the wires connected to the power panel main unit RJ45 cable, Case, and 9V battery.