T0053450199

T0053450199 is WCU high-precision temperature measurement device. This compact stand-alone high-precision temperature measurement device is suitable for quick and accurate temperature measurement. The WCU unit is strategically designed for users that need to measure fast and easy, while maintaining the highest level of accuracy. It comes with a large, non-backlite display. Digital display for fast temperature unit change between °C and °F and other functionalities. Values are easily readable from the large non-backlite display. Effortlessly auto-calibrate in less than 10 seconds, ensuring the operator can focus on the important soldering task with a precise temperature for best productivity. The Auto-Calibration function can be used with: WX 1, WX 2, WXD 2, WXA 2, WXR 3, WXsmart. Low energy consumption, auto turn-off timer saves battery life shutting down the unit’s power after 10 mins without use. 9V dry battery alkaline cell recommended.

• Intuitive navigation, high mobility
• Compact designed, battery-powered
• Simultaneous use of thermocross and thermocouple
• Temperature measurement count function
• WCU display will show/hold the maximum temperature measured
• ESD safe
• Temperature measuring range (thermocross) is 0°C – 400°C/32°F – 752°F
• Temperature measuring range (type-K/thermocouple) is 150°C to +1200°C/302°F to +2192°F
• Applicable sensor is K (CA) type thermocouple
• Dimension (L x W x H) is 5.43inch x 2.87inch x 1.69inch, ambient temperature range from 0°C – 40°C

Notes

For the auto-calibration function a RS 232 cable (order number: T0058764710) needs to be purchased separately. Recommended battery is Ansmann XPower alkaline battery 9V E-block.