NA555S-13

NA555S-13 is a precision timer. This precision timing device is circuit capable of producing accurate time delays or oscillation. In the time-delay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low.

• Timing from microseconds to hours
• Astable or monostable operation, adjustable duty cycle
• TTL compatible output can source or sink up to 200mA
• Supply voltage range from 4.5 to 16V at TA=25°C
• Threshold voltage level range from 8.8 to 11.2V at VCC=15V, TA=25°C
• Temperature coefficient of timing interval is 50ppm/°C typ at TA=full range, each time, monostable
• Output pulse rise/fall time is 300ns max at CL=15pF, VCC=5V to 15V, TA=25°C
• Trigger current is 0.5µA typ at TRIG at 0V, VCC=5V to 15V, TA=25°C
• SO-8 package
• Operating temperature range from -40 to 105°C