2126.83

2126.83 is a MiniFlex® HF flexible sensors. The high frequency MiniFlex® HF is a compact flexible AC current transformer composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes. The high frequency MiniFlex® HF, with a bandwidth frequency from 5Hz to 1MHz, is perfect to connect to any oscilloscope with BNC input to analyze complex-shaped current and transient present in electronic power supplies, welding stations, etc. It presents virtually no load to the system under test and cannot be damaged by overloads. The sensor assembly is insulated for 1000V CAT III, 600V CAT IV. It has an mV output proportional to the current measured for direct readings on DMM, data loggers or oscilloscopes, TRMS measurements are taken when connected to a TRMS meter.

• Maximum conductor size of 1.77" (45mm)
• Measurement range from 0.5 to 300A with 1% accuracy
• Current range from 30 and 300Arms AC
• Output signal of 100mV/A and 10mV/A
• Operating temperature range from 14 to 131°F (-10 to +55°C)
• 6.5ft (2m) cable length
• IP50 rated
• Overload indication
• Dimension (H x W x D) is module: 4.0 x 2.5 x 1.1”
• EN/IEC 61010-1 600V CAT IV, 1000V CAT III, EN/IEC 61010-032:2002 safety compliance