DS1813R-10+T&R

The DS1813 EconoReset uses a precision temperature reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for approximately 150ms to allow the power supply and processor to stabilize. The DS1813 also monitors a pushbutton on the reset output. If the reset line is pulled low, a reset is generated upon release and will be held in reset output low for typically 150ms.

• Automatically Restarts a Microprocessor After Power Failure
• Monitors Pushbutton for External Override
• Maintains Reset for Typically 150ms After Vcc Returns to an In-Tolerance Condition
• Reduces Need for Discrete Components
• Precision Temperature-Compensated Voltage Reference and Voltage Sensor
• Efficient Open-Drain Output with Internal 5.5kΩ Pullup Resistor

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party