LT3652HVIMSE#PBF

LT®3652HV is a complete monolithic step-down battery charger that operates over a 4.95V to 34V input range. This provides a constant-current/constant-voltage charge characteristic, with maximum charge current externally programmable up to 2A. The charger employs a 3.3V float voltage feedback reference, so any desired battery float voltage up to 18V can be programmed with a resistor divider. This employs an input voltage regulation loop, which reduces the charge current if the input voltage falls below a programmed level, set with a resistor divider. Application includes solar-powered applications, remote monitoring stations, portable handheld instruments, 12V to 24V automotive systems, and battery charging from the currently limited adapters.

• Parallelable for higher output current
• 1MHz fixed frequency
• Binary-coded open-collector status pins
• VIN operating range from 4.95 to 34V (VBAT = 4.2, TA = 25°C)
• Typical OVLO hysteresis is 35V (VIN rising, TA = 25°C)
• Typical float voltage reference is 3.3V (TA = 25°C)
• Typical operating input supply current is 2.5mA (CC/CV Mode, ISW = 0, TA = 25°C)
• 12-lead plastic MSOP package
• Temperature rating range from -40°C to 125°C

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party