MAX13080ECSD+

The MAX13080ECSD+ is a ±15KV ESD protected, fail-safe, hot swap, +5V RS485/RS422 transceiver in 14 pin NSOIC package. The fail-safe circuitry in this device features a logic high receiver output when receiver input is open or shorted. The receiver outputs a logic high if all transmitters on a terminated bus are disabled (high impedance) and a hot swap capability to eliminate false transitions on the bus during power-up or hot insertion. This device has reduced slew rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables allowing error free data transmission up to 250Kbps. It has a 1/8 unit load receiver input impedance which allows up to 256 transceivers on the bus.

• Supply voltage range from 4.5V to 5.5V
• Operating temperature range from 0°C to 70°C
• One driver and one receiver
• Full duplex communication
• True fail-safe receiver while maintaining EIA/TIA-485 compatibility
• Hot swap input structures on DE and RE(complimentary)
• Low current shutdown mode

Applications

Communications & Networking, Sensing & Instrumentation, Security, Lighting, Industrial

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party