MAX3490EESA+

MAX3490EESA+ is a +3.3V, 12Mbps and slew-rate-limited true RS-485/RS-422 low power transceiver. This contains one driver and one receiver. It features enhanced electrostatic discharge (ESD) protection. This transmitter output and receiver input is protected to ±15kV using IEC 1000-4-2 Air-Gap Discharge, ±8kV using IEC 1000-4-2 Contact Discharge, and ±15kV using the Human Body Model. The driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if both inputs are open circuit. The MAX3490E features full duplex communication. Application includes telecommunications, industrial-control local area networks, transceivers for EMI-sensitive applications, integrated services digital networks, and packet switching.

• Operate from a single +3.3V supply - no charge pump required
• Interoperable with +5V logic, 2nA low-current shutdown mode
• Common-mode input voltage range from -7V to +12V
• Current-limiting and thermal shutdown for driver overload protection
• 12Mbps guaranteed data rate, 3to 3.6V supply voltage range, full duplex
• Differential driver output is 2.0V min (RL = 100 ohm, TA = +25°C)
• Supply voltage range from 3.0 to 3.6V (TA = +25°C)
• Receiver input resistance is 12kohm min (-7V ≤ VCM ≤ 12V, TA = +25°C)
• Supply current is 1.1mA typ (DE = VCC, active low RE = 0 or VCC, TA = +25°C)
• 8 pin SO package, operating temperature range from -40°C to +85°C

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party