MAX4721EBL+T

The MAX4721EBL+T is a dual SPST analogue switch in 9 pin UCSP package. This low voltage, low on-resistance (RON) analogue switch operates from a single 1.8V to 5.5V supply. It is designed for USB 1.1 and audio switching applications. The device offers tON of less than 80ns and tOFF less than 40ns at +2.7V. The digital logic inputs are 1.8V logic compatible with 2.7V to 3.6V supply. It has maximum on-resistance of 4.5ohm, maximum on-resistance flatness of 1.2ohm and maximum on-resistance match between channels of 0.3ohm at TA = +25°C with single +3V supply. The MAX4721EBL packaged in a chip scale package (UCSP) which significantly reduces required PC board area. The device is used in battery operated equipments, audio/video signal routing, low voltage data acquisition systems and sample and hold circuits.

• Normally open (NO) switch configuration
• Operating temperature range from -40°C to 85°C
• Less than 2ns differential skew and low distortion of 0.03%
• On-channel -3dB bandwidth of less than 300MHz at TA = +25°C with single +3V supply
• Charge injection of 5pC at TA = +25°C with single +3V supply
• 0.01nA COM off leakage current & 0.01nA COM on-leakage current (TA = +25°C, single +3V supply)
• -55dB high off isolation and -80dB low crosstalk (f = 10MHz, TA = 25°C, single +3V supply)
• Positive supply current of 1μA at TMIN to TMAX
• Rail to rail signal handling
• Audio/Video Signal Routing; Battery-Operated Equipment; Communications Circuits; Low-Voltage Data-Acquisition Systems; Sample-and-Hold Circuits

Applications

Signal Processing, Communications & Networking

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party