MAX691ACPE+
Microprocessor Supervisor, 1 Monitor, Active-High, Active-Low, 4.65 V Threshold, 0 to 70 °C, DIP-16
Vous en voulez davantage ?
| Quantité | Prix |
|---|---|
| 1+ | 3,300 $ |
| 10+ | 3,300 $ |
| 25+ | 3,300 $ |
| 50+ | 3,300 $ |
| 100+ | 3,300 $ |
| 250+ | 3,300 $ |
Informations produit
Aperçu du produit
MAX691ACPE+ is a microprocessor supervisory circuit. It improves performance with 30μA supply current, 200ms typ reset active delay on power-up, and 6ns chip-enable propagation delay. Features include write protection of CMOS RAM or EEPROM, separate watchdog outputs, backup-battery switchover, and a RESET output that is valid with VCC down to 1V. Typical applications are computers, controllers, intelligent instruments, critical μP power monitoring.
- 200ms power-OK/reset timeout period
- On-board gating of chip-enable signals, 10ns maximum delay
- MaxCap® or SuperCap compatible
- Guaranteed active-low RESET assertion to VCC = +1V
- Voltage monitor for power-fail or low-battery warning
- 16-pin plastic DIP package
- Temperature rating range from -0°C to +70°C
- Operating voltage range from 0 to 5.5V
- VCC-to-VOUT on-resistance is 0.8ohm typ (VCC = 4.5V)
- Reset threshold hysteresis is 15mV typical
Remarques
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Spécifications techniques
-
4.65V
4.75V
Active-High, Active-Low
16Pins
200ms
70°C
-
No SVHC (21-Jan-2025)
DIP
-
1Monitors
5.5V
DIP
Through Hole
0°C
-
-
-
4.65V
Documents techniques (2)
Produits associés
6 produit(s) trouvé(s)
Législation et Questions environnementales
RoHS
RoHS
Certificat de conformité du produit