MAX7375AXR405+T

The MAX7375AXR405+T is a silicon oscillator in 3 pin SC-70 package. This silicon oscillator, intended as a low cost improvement replacing ceramic resonators, crystals, crystal oscillator modules used as clock source for microcontrollers and UARTs in 3V, 3.3V and 5V applications. It is a fully integrated oscillator, supplied at specific factory-trimmed frequencies with a rail to rail 50% duty cycle square-wave output. The oscillator frequency is generated directly without the use of a phase-locked loop (PLL). No additional components are used to set or adjust the frequency. It is highly resistant to vibration and EMI, high output drive current and absence of high-impedance nodes also makes the oscillator less susceptible to dirty or humid operating conditions. With a wide operating temperature range, oscillator is a good choice for demanding home appliance environments & white goods.

• Supply voltage range is 2.7V to 5.5V
• Operating temperature range from -40°C to 125°C
• Factory-trimmed oscillator (600KHz to 9.99MHz)
• Output drive current of ±10mA & 2% initial accuracy
• Temperature drift of ±50ppm/°C
• Fast start-up time is 5µs
• Maximum duty cycle range of 40% to 60%
• 5ns Output rise and fall time, low EMI
• Very low jitter of 160psp-p at 8MHz

Applications

Clock & Timing, Portable Devices

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party