410-328-35

Cmod A7 breadboardable Artix-7 FPGA module. The Cmod A7 is a small, breadboard friendly 48 pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and MicroBlaze embedded soft-core processor designs using Xilinx's development software, Vivado. There are 44 Digital FPGA I/O signals and two FPGA analogue inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate programmable logic design directly into a solderless breadboard circuit. At just 0.7" by 2.75", it can also be loaded in a standard socket and used in embedded systems.

• XC7A35T-1CPG236C FPGA part
• 512KB SRAM with an 8bit bus and 8ns access times
• 4MB quad-SPI flash, USB-JTAG programming circuitry
• Powered from USB or external 3.3-5.5V supply connected to DIP pins
• USB-UART bridge system connectivity
• 48-pin DIP connector with 44 digital I/O and 2 analogue inputs (0-3.3V)
• One Pmod connector with 8 digital I/O