80TK CAL

The 80TK CAL from Fluke is a Type K thermocouple module. This thermocouple is used with type-K thermocouples in low voltage applications (below 24VAC, 60VDC) and digital multimeter. The 80TK accepts the output of any K-type thermocouple and converts it to 1mV per degree (Celsius or Fahrenheit). A three position switch acts as a power switch as well as selecting Fahrenheit or Celsius scaling for the output. In addition, the OFF position of the power switch allows to read the battery condition via the external multimeter. The thermocouple input accepts wire leads or standard minithermocouple connectors. Temperature is measured by exposing or attaching thermocouple to surface to be measured. The multimeter displays the temperature directly in degrees Fahrenheit or Celsius. The basic accuracy is 0.5% ±2°C (-20 to 350°C), 1.75% ±2°C (351 to 500°C), 2% ±2 °C ( 501 to 1000°C), 2.5% ±2°C (-50 to -21°C).

• Calibrated thermocouple module
• Converts a DMM to a thermometer
• Measurement range from -50 to 1000°C (probe dependent)
• Resolution is 0.1°C/F in 400mV range, 1.0°C/F in 4V range (4000 count display)
• Maximum voltage at thermocouple input is 60NDC, 24VDC
• 3/4 in spaced banana plugs, 10Mohm minimum load resistance
• Standard 9V battery (NEDA #1604, 6F22, 006P) with 1600+ hours, 6.5V minimum battery life
• Ambient operating temperature range from 0°C to 50°C
• Weight is 126g, overall length is 11.75mm

Avertissements

To avoid electrical shock, do not use this instrument when voltages exceeding 30Vrms, 42.4 peak or 60VDC are present. The probe tip is electrically connected to the output terminals.