FLUKE-117 CAL

The FLUKE-117 CAL is a compact true-rms electrician's multimeter with non-contact voltage measurement for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster. It has 600.0mV DC millivolts, 6.000V to 600.00V DC volts, 600.0V auto volts, 600.0mV AC millivolts true-rms, 6.000V to 600.0V AC volts true-rms, 600 ohm continuity, 600 ohm to 40Mohm resistance, 2.00V/0.001V diode test, 1000nF to <gt/> 1000µF capacitance, 1nF to 500µF Lo-Z capacitance, 6.000A to 10.00A AC amps true-rms (45Hz to 500Hz), 6.000A to 10.00A DC amps and 99.99Hz to 50KHz frequency (V or A input). It complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 6101B (2003) and IEC/EN 61010-1 2nd edition for measurement Category III, 600V, pollution degree 2, EMC EN61326-1UL, CSA, CE, TUV, VDE standards and safety rated to CAT III 600V.

• Calibrated electrician's multimeter
• Low input impedance helps to prevent false readings due to ghost voltage
• UL, CE, CSA, TUV, (N10140), VDE certified
• Large white LED backlight to work in poorly lit areas, display hold, auto/manual ranging
• Min/max/average with elapsed time to record signal fluctuations
• Compact ergonomic design for one handed operation, low battery indication
• AutoVolt (automatic AC/DC voltage selection), VoltAlert (non-contact voltage detection)
• 9V alkaline, NEDA 1604A/ IEC 6LR61 battery with 400hour life typical without backlight
• 6000 counts digital display (updates 4 per second), 33 segments bar graph (updates 32 per second)
• 167mm x 84mm x 46mm size, 550g weight, -10 to 50°C operating temperature

Applications

Test & Measurement

Contenu

FLUKE-117 multimeter, 4mm silicone test lead set, Holster, User manual, 9V battery (installed).

Avertissements

Use caution with voltages above 30VACrms, 42VACpeak, or 60VDC. These voltages pose a shock hazard.

Remarques

Only use test leads that have the same voltage, category and amperage ratings as the meter and that have been approved by a safety agency.