FLUKE-1507 CAL

The FLUKE-1507 CAL is an insulation resistance tester. It is compact, rugged, reliable and easy to use. With its multiple test voltages, it is ideal for many troubleshooting, commissioning and preventative maintenance applications. Using this user can make repetitive tests simple and easy with the 1507’s compare (pass/fail) function. Additional features, like the remote probe on this tool save both time and money when performing tests. Repetitive or hard to reach testing is easy with the remote test probe and live circuit detection prevents insulation test if voltage is greater than 30V is detected for added user protection. The tester is complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO 61010-1-04 and IEC/EN 61010-1 2nd edition for measurement category IV 600V (CAT IV), TUV per standard IEC/EN 61010-1 2nd edition. The FLUKE-1503 accepts optional Fluke TPAK magnetic hanging system to free your hands for other work.

• Calibrated insulation resistance tester
• 0.01Mohm to 10Gohm insulation resistance and 50V, 100V, 250V, 500V, 1000V insulation test voltage
• Auto-discharge of capacitive voltage for added user protection, IP40 IP rating
• 0.1V to 600V AC/DC voltage, 200mA continuity, 0.01ohm to 20.00Kohm earth bond resistance measurement
• Save battery power with auto power off, read measurements easily with large, backlit display
• CAT IV 600V overvoltage category rating for added user protection
• 600VACrms or DC maximum voltage applied to any terminal
• Save time and money with automatic calculation of polarization index & dielectric absorption ratio
• Powered by four AA batteries (NEDA 15A or IEC LR6)
• 5cm (H) x 10cm (W) x 20.3cm (L) size, 550g weight, -20°C to 55°C operating temperature

Applications

Test & Measurement

Contenu

FLUKE-1507 insulation resistance tester, Remote probe, Test leads, Test probes, Alligator clips, User documentation.

Avertissements

Use caution with voltages above 30VACrms, 42VACpeak or 60VDC. These voltages pose a shock hazard.

Remarques

Check the test leads for continuity before use. Do not use if the readings are high or noisy.