FLUKE-718-300G CAL DU

The FLUKE-718-300G CAL DU is a pressure calibrator with 5 digit LCD pressure and current simultaneous display for zero, min, max, hold, damp functions. This provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique, easy to clean out access ports built into the pump protect the pump from fluids and provides the ability to service the pump without disassembly. This is best in class mA accuracy of 0.015% for better measurement confidence and workload coverage. Switch test feature for quicker and more accurate pressure switch testing.

• Calibrated with data and uncertainties pressure calibrator
• Pressure source and milliamp measurement to calibrate and maintain almost any pressure device
• Range of -12PSI to 300PSI, (-850mbar to 20.68bar, -85 to 2068.42KPa), 0.01psi, 1mbar resolution
• 30V maximum voltage, operating temperature of -10°C to 55°C & over pressure 375PSI 25bar
• Error % calculation for quicker pass/fail decision making in the field
• CSA C22.2 No. 1010.1: 1992 safety and EN50082-1: 1992 and EN55022: 1994 Class B EMC standards
• 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline (two batteries in 718), 4 to 20hr battery life
• Reduces cost of ownership and repairs, min/max/hold to capture changing measurements
• 1M drop test shock and random, 2g, 5Hz to 500Hz vibration
• Size (718 with holster) is 216mm x 94mm x 66mm (8.50in x 3.72in x 2.60in), weight of 992g (35oz)

Applications

Test & Measurement

Contenu

Fluke 718 300G pressure calibrator, Protective yellow holster with test lead storage, Instructions sheet (14 languages), Test leads and alligator clip, Two 9V alkaline batteries and NIST traceable calibration report and data.

Remarques

For use with non-corrosive gasses.