FLUKE-725 US CAL D

The FLUKE-725 US CAL D is a multifunction process calibrator. This is a handheld, battery-operated instrument that measures and sources electrical and physical parameters. The multifunction process calibrator is a powerful, yet easy to use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. The 725's split display let's to view input and output values simultaneously. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests. It's simple controls without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as user do. It store frequently used test setups for later use, backlight lets to work in poor light, large battery capacity of four AA cells and battery door for easy changes.

• Calibrated with data multifunction process calibrator & small, streamlined shape, easy to carry
• Measure volts, mA, RTDs, thermocouples, frequency and ohms to test sensors and transmitters
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms & pressure to calibrate transmitters
• Source mA with simultaneous pressure measurement to conduct valve and I/P tests
• Support flow meter testing with frequency and CPM functions
• Power transmitters during test using loop supply with simultaneous mA measurement
• Handling of fast pulsed RTD transmitters and PLCs with pulses as short as 10 ms
• EN 61010-1:1993, ANSI/ISA S82.01-1994, CAN/CSA C22.2 No 1010.1:1992 approvals
• Operating temperature of -10°C to +55°C, 3000m operating altitude
• Dimension of 130mm x 236mm x 61mm, 0.65Kg weight

Applications

Test & Measurement

Contenu

Fluke 725 multifunction process calibrator, One set of AC72 alligator clips, One set of stackable test leads, One set of TL 75 test leads, User manual, NIST traceable calibration report and data.