FLUKE-77-4 CAL

The FLUKE-77-4 CAL is a versatile digital multimeter for field service or bench repair. The Fluke 77-IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke’s original 70 series with more measurement functions, conformance to the latest safety standards and a much larger display that’s easier to view. This multimeter features large display, backlight for work in dim areas, min/max to record signal fluctuations, ergonomic overmoulded housing with integrated probe holders, auto and manual ranging. It has 6000 counts updates 4/sec digital, 33 segments updates 32/sec bar graph, 10000 counts capacitance, 10000 counts frequency display. It meets measurement category 1000 V CAT III and Category IV 600 V safety standards.

• Calibrated digital multimeter
• Voltage DC/AC range of 6.000V to 1000V/ 600.0mV to 1000V, +/- (0.3%+1)/+/-(2.0%+2) DC/AC accuracy
• Amps AC/DC range of 60.00mA to 10A/60.00mA to 10A, AC/DC accuracy of 2.5%+2 /1.5%+2
• Resistance range of 600.0 ohm to 50Mohm, accuracy of +/- (0.5% + 1), 0.1ohm resolution
• Capacitance range of 1nF to 9,999µF, +/- (1.2% + 2) accuracy, 1nF resolution
• 99.99Hz to 99.99KHz frequency range, +/- (0.1% + 1) accuracy, 0.01Hz resolution
• 1000V maximum voltage between any terminal and earth ground, 8KV peak per IEC 61010 surge protection
• Operating temperature range from -10°C to 50°C & 2000 meters operating altitude
• 440mA, 1000V FAST ohm fuse for mA inputs & 11A, 1000V FAST ohm fuse for A inputs
• Size of 4.3cm x 9cm x 18.5cm (H x W X L), weight of 420g, 400hr typical (alkaline) battery life

Applications

Test & Measurement

Contenu

Fluke-77-4 digital multimeter, TL75 test leads, User manual, 9V battery (installed).