KIT33978EKEVB

KIT33978EKEVB is an evaluation board (EVB) that features the MC33978 - 22 channel switch detection interface with programmable wetting current. The kit is designed to detect the closing and opening of up to 22 switch contacts. The switch status, either open or closed, is transferred to the microprocessor unit through a serial peripheral interface (SPI). The device also features a 24-to-1 analog multiplexer for reading inputs as analog. The analog input signal is buffered and provided on the AMUX output pin to be read by an external MCU. The MC33978 device has two modes of operation, Normal and Sleep. Normal Mode allows programming of the device and supplies switch contacts with pull-up or pull-down current as it monitors switch change-of-state, while the sleep mode provide switch status detection with maximum power saving. The KIT33978EKEVB can be controlled through a USB/SPI dongle (KITUSBSPIDGLEVME) connected to the PC’s USB port.

• MC33978 device with 22 channels switch detection and status report capability
• On-board 16-pin interface connector for the SPI-to-USB Interface Dongle (KITUSBSPIDGLEVME)
• Status LEDs to report the status of the MC33978 Interrupt (INT) and Wake-Up lines
• Double row, 100mils SGx/SPx pin connectors for easy interface with external loads
• Direct connection to Batter power with optional 5V/3.3V LDO for VDDQ rail supply

Contenu

Assembled and tested evaluation board/module in anti-static bag, Warranty card.