MPL115A2ST1

MPL115A2ST1 is a miniature I²C digital barometer. The absolute pressure sensor with a digital I²C output targeting low-cost applications. A miniature 5 x 3 x 1.2mm LGA package is ideally suited for the space-constrained requirements of portable electronic devices. Low current consumptions of 5μA during Active mode and 1μA during Shutdown (Sleep) mode are essential when focusing on low-power applications. The wide operating temperature range spans from -40°C to +105°C to fit demanding environmental conditions. The MPL115A2 employs a MEMS pressure sensor with a conditioning IC to provide accurate pressure measurements. An integrated ADC converts pressure and temperature sensor readings to digitized outputs via an I²C port. The application includes barometry (portable and desktop), altimeters, weather stations, hard disk drives (HDD), industrial equipment, health monitoring, and air control systems.

• Factory calibrated, integrated ADC
• I²C interface (operates up to 400KHz), 7-bit I²C address = 60h
• Monotonic pressure and temperature data outputs
• Operating supply voltage range from 2.375 to 5.5V (VDD = 3.3V, TA = +25°C)
• Supply current is 3.5μA typ (standby, VDD = 3.3V, TA = +25°C)
• Resolution is 0.15kPa typ (VDD = 3.3V, TA = +25°C), accuracy is ±1kPa max (-20 to 85°C)
• Power supply rejection is 0.1kPa/V typ (typical operating circuit at DC, VDD = 3.3V, TA = +25°C)
• Conversion time is 1.6ms typ (start pressure and temperature conversion, VDD = 3.3V, TA = +25°C)
• SCL clock frequency is 400KHz max (VDD = 2.375V to 5.5V, TA = -40°C to +105°C)
• TSON8 package, operating temperature range from -40 to +125°C