5.15.01 FLASHER RX

The 5.15.01 is a Flasher RX stand alone flash programming tool for Renesas RX microcontrollers. This device comes with the PC software which is used to configure the Flasher RX. Flash memory stores the target program and target information. A target system is required. It is a programming tool for Renesas RX600 series microcontrollers with on chip or external flash memory and Renesas RX core. Flasher RX is designed for programming flash targets with the J-Flash software or stand alone. In addition to that Flasher RX has all of the J-Link RX functionality. This tool connects via Ethernet, USB or via RS232 interface to a PC, running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista or Windows 7. Flasher RX itself has a built in 20 pin JTAG connector but is shipped with an 14 pin adapter for Renesas RX devices. Programming of external parallel NOR flash is currently not supported by Flasher RX.

• Stand alone JTAG programmer (once set up, flasher can be controlled without the use of PC program)
• Supports internal and external flash devices
• Free software updates, 2 years of support
• 64MB memory for storage of target program
• Serial in target programming supported
• Data files can be updated via Ethernet/USB using J-Flash or mass storage functionality of Flasher RX
• Target interface: JTAG
• No power supply required, powered through USB
• Can be used as J-Link (JTAG emulator) with a download speed of up to 720KBytes/second
• Programming speed between 30KBytes/second to 300KBytes/second depending on target hardware

Applications

Embedded Design & Development

Contenu

Flasher RX, RX 14 adapter, 14 pin Ribbon cable, Ethernet cable, USB cable, USB power supply, RS232 cable (1:1).