POE1000ILT.

POE1000ILT is a power panel Cat5/5e/6/6a/7/8 digital volt meter with probe. Understanding what data and power is on a CAT5/5 cable is becoming increasingly important as cables are becoming crowded with a wide variety of data devices and power sources. The Power Panel CAT5/6 DVM is the right tool because once connected, it goes to work scanning each pin on a connector and displaying both the activity and pair location. Whether it be network devices, phones, or Power Over Ethernet, all is displayed. If you are a VOIP phone and IP camera installer, you willo find the Power Panel particularly useful because you will know there is power and a data pair available for your equipment.

• Scan all pins to locate the active devices and voltage on the Ethernet cable or port
• Display the speed (10MB,100MB,1GB), duplex (full or half) and pinouts of the devices
• Display the PoE voltage and pinouts – mid-span, end-span or all pairs (if PoE is present)
• Measure the negotiated speed of the devices when connected
• Power pass thru - two jacks allow PoE power to be passed to the PoE device so it can be tested
• Measure watt draw of the PoE device
• Indicates availability of power and data pair for your equipment
• Connect to any device with an Ethernet plug—computer, switch, VoIP phone, IP camera or access point
• Measures up to 75V/99W across all four pairs
• Built-in tone generator, port beacon and link pulse transmit button, 1 year warranty

Contenu

Power panel CAT 5/6 digital volt meter, RJ45 cable, Case, 9V battery.