FP-NML2V

The FP-NML2V is a high quality converter that provides line-level outputs from two Dante network audio channels. Each un-attenuated line output provides +4dB balanced for a network digital audio level of -18dB. The output directly interfaces with other professional and commercial audio equipment without the need for additional gain. The crosstalk is lower than the noise floor on all outputs. The noise floor is lower than 80dB, and the headroom is greater than 18dB.

• Digital Audio Ethernet Protocol:Dante
• Transmission Rate:100 Mbps
• Sample Rates Supported:44.1 kHz, 48 kHz (default)
• Bit Depth Supported:24 bits
• Audio Operating Levels:-18 dBFS = +4 dBu
• Outputs (2):Balanced, detachable terminal block
• Output Level:+4 dBu (nominal)
• Output Impedance:150 O balanced; 75 O unbalanced
• VCA Control:0 to 10 Vdc or 0 to 10 kO linear
• VCA Attenuation:0 to <gt/> 90 dB, Audio taper
• Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
• THD+N: 18 dB
• Indicators (3):Ethernet Link and Speed, SYNC
• Power Connections (2):Power Jack; Detachable Terminal Block
• Ambient Operating Environment:0° C to 40° C
• Power Requirement:24 Vdc @ 135 mA.
• Dimensions:4.85" x 1.75" x 3.25"
• Weight:0.682 lbs.