LC1D25BD

LC1D25BD is a 3P(3 NO) TeSys D contactor for motor control applications up to 25A/690V AC-3/3e (11KW at 400V). It provides a 24VDC coil with transient suppressor module, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Complies with CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 60947-4-1, IEC 60335-1:Clause 30.2, IEC 60335-2-40:Annex JJ, UL 60335-2-40:Annex JJ, CSA C22.2 No 60947-4-1.

• AC-4, AC-3, AC-1, AC-3e utilization category
• Power circuit: <= 690VAC 25...400Hz, power circuit: <= 300VDC rated operational voltage
• 5.5KW at 220...230VAC 50/60 Hz (AC-3) motor power
• 450A at 440V for power circuit conforming to IEC 60947 rated breaking capacity
• 3.2W AC-1/1.25W AC-3/1.25 W AC-3e power dissipation per pole
• Certified by UL, CCC, CSA, Marine, UKCA, EAC, CB scheme
• IP20 front face conforming to IEC 60529
• Permissible ambient air temperature around the device range from -40 to 60°C
• Height is 85mm, width is 45mm, depth is 101mm
• 18 months warranty