ACD-14-PRO

The ACD-14-PRO from Amprobe Instruments is a dual display 600A TRMS clamp meter. This rugged and reliable clamp meter is designed for professional electrician and technician for fast response, feature packed, go-to clamp meter. It offers complete range of measuring functions for both HVAC and electrical applications. This modern clamp meter has large low light backlit LCD dual display for dimly lit areas and is capable of simultaneously displaying voltage and amperage to perform voltage drop tests. It offers TRMS, low pass filter, in-rush current, frequency, resistance, capacitance, temperature, DC microamps, amp-tip and non contact voltage detection. true RMS ensures accurate voltage measurements in noisy environments. Designed with rubber over modelled enclosure for extra durability and safety rated to CAT III 600V. It complies with UL/IEC/EN 61010-1, UL/IEC/EN 61010-2-033, CAN/CSA C22.2 no 61010-1, UL/IEC/EN 61010-2-032, IEC/EN 61010-031, cULus and CE, pollution degree 2 rated.

• 600V AC/DC voltage, 600A AC current, 0 to 2000µA DC micro amps and 30mm jaw opening
• 5Hz to 999.9Hz frequency, -40°C to 400°C temperature range, 6000Kohm resistance & 2500µF capacitance
• Less than 10 ohm continuity beeper, nominal update rate of 5 per second
• Amp-tip function for precise low current measurement of small diameter wires down to 0.1A
• HVAC applications with temperature, DC microamps and capacitance
• In-rush current, data hold, non contact voltage detection (NCV), audible continuity and diode test
• Auto ranging, auto power offer, low battery indicator
• Testing variable frequency drives with low pass filter
• Operating temperature range from 0°C to 40°C
• Dimension is 219mm x 77mm x 37mm (L x W x H) and weight is 208g

Applications

Test & Measurement

Contenu

ACD-14-PRO meter, User manual, Test leads, Carrying case, Batteries AAA (2), Banana plug K-type thermocouple.

Avertissements

To avoid electrical shock hazard, observe proper safety precautions when working with voltages above 60VDC or 30VAC rms. These voltage levels may cause potential shock hazard to the user.

Remarques

Disconnect the test leads from test points before changing meter functions.