ADL5501AKSZ-R7

ADL5501 is a mean-responding TruPwr™ power detector for use in high frequency receiver and transmitter signal chains from 50MHz to 6GHz. It is easy to apply, requiring only a single supply between 2.7V and 5.5V and a power supply decoupling capacitor. The input is internally ac-coupled and has a nominal input impedance of 50 ohm. The output is a linear-responding dc voltage with a conversion gain of 6.3V/V rms at 900MHz. It is intended for true power measurement of simple and complex waveforms. The device is particularly useful for measuring high crest factor (high peak-to-rms ratio) signals, such as CDMA-, CDMA2000-, W-CDMA-, and QPSK-/QAM based OFDM waveforms. The on-chip modulation filter provides adequate averaging for most waveforms. Application includes measurement of CDMA-, CDMA2000-, W-CDMA-, and QPSK-/QAM-based OFDM, and other complex modulation waveforms, RF transmitter or receiver power measurement.

• True rms response, excellent temperature stability
• Frequency range from 50 to 6000MHz (input RFIN, TA = 25°C, VS = 3.0V)
• Input impedance is 87 6.9ohm pF (typ, TA = 25°C, VS = 3.0V)
• Input return loss is 11.0dB (typ, TA = 25°C, VS = 3.0V)
• Dynamic range is 25dB (typ, CW input, −40°C <lt/> TA <lt/> +85°C, ±1dB error, VS = 3V)
• Maximum input level is 8dBm (typ, ±1dB error, TA = 25°C)
• Conversion gain is 4.5V/V rms (typ, VOUT = (gain × VIN) + intercept, TA = 25°C)
• Output voltage is 1.81V (typ, high power in, PIN = 5dBm, 400mV rms)
• 6-lead SC-70 package, temperature range from -40°C to +85°C

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party