LTC6810HG-1#3ZZPBF

LTC6810-1 is a multicell battery stack monitor. It measures upto 6 series-connected battery cells with a total measurement error of less than 1.8mV. The cell measurement range of 0V to 5V makes the device suitable for most battery chemistries. All 6 cells can be measured in 290µs, and lower data acquisition rates can be selected for high noise reduction. Multiple LTC6810-1 devices can be connected in series, permitting simultaneous cell monitoring of long, high voltage battery strings. Each device has an isoSPI interface for high speed, RF-immune, long distance communications. Using the LTC6810-1, multiple devices are connected in a daisy chain with one host processor connection for all devices. It supports bidirectional operation, allowing communication even with a broken wire. It is widely used in application such as electric and hybrid electric vehicles, backup battery systems, grid energy storage, high power portable equipment etc.

• Stackable architecture for high voltage systems
• Low EMI susceptibility and emissions
• Bidirectional for broken wire protection
• Guaranteed performance down to 5V
• Performs redundant cell measurements
• Engineered for ISO 26262 compliant systems
• 4 general purpose digital I/O or analog inputs
• Temperature or other sensor inputs, configurable as an I²C or SPI
• Operating temperature is -40°C to 125°C, qualified for automotive application
• Package style is 44-lead plastic SSOP

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party