MAX4486ASA+

The MAX4486ASA+ is a high speed, low cost, rail to rail dual operational amplifier (op amp) in 8 pin NSOIC package. The device operates from single 2.7V to 5.5V power supply. It is unity gain stable with 7MHz gain bandwidth product and capable of driving an external 2Kohm load with rail to rail output swing. The amplifier is stable with capacitive loads of up to 100pF. The MAX4486 is used in single supply zero crossing detector, instruments and terminals, electronic ignition modules, infrared receivers for remote controls and sensor signal detection.

• Suitable for variety of harsh environments
• Operating temperature range from -40°C to 125°C
• Slew rate of 20V/μs
• Ground sensing inputs
• No phase reversal for overdriven inputs
• 85dB large signal voltage gain with 2Kohm load and 0.01% THD with 2Kohm load
• Supply current of 1.9mA per amplifier (VDD = 2.7V) and 2.2mA (VDD = 5V)
• Input offset voltage of ±0.3mV and input bias current of ±0.1pA
• Input offset current of ±0.1pA
• CMRR of 83dB at VSS ≤ VCM ≤ VDD - 1.3V and PSRR of 85dB at 2.7V ≤ VDD ≤ 5.5V

Applications

Signal Processing, Portable Devices, Industrial, Automation & Process Control

Avertissements

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.