MAX9920ASA+T
Current Sense Amplifier, Uni/Bidirectional, High Side, Low Side, 230 kHz, HSOIC, 8 Pins, -40 °C

| Fabricant | ANALOG DEVICES |
|---|---|
| Réf. Fabricant | MAX9920ASA+TCopie |
| Délai d’approvisionnement standard du fabricant | 12 semaines |
| Code Commande | Mise en bobine38AC2009RL Bandes découpées38AC2009 |
| Votre numéro de pièce | |
| Fiche technique |
| Type de conditionnement | Quantité | PU HT: | Total |
|---|---|---|---|
| Bandes découpées | 1 | 5,610 $ | 5,61 $ |
| Total Prix | 5,61 $ | ||
| Quantité | Prix |
|---|---|
| 1+ | 5,610 $ |
| 25+ | 3,890 $ |
| 50+ | 3,710 $ |
| 100+ | 3,510 $ |
| 250+ | 3,350 $ |
| 500+ | 3,320 $ |
Informations produit
| Fabricant | ANALOG DEVICES |
|---|---|
| Réf. Fabricant | MAX9920ASA+TCopie |
| Délai d’approvisionnement standard du fabricant | 12 semaines |
| Code Commande | Mise en bobine38AC2009RL Bandes découpées38AC2009 |
| Fiche technique | |
| Current Sense Amplifier Type | High Side, Low Side |
| Gain Bandwidth Product | 230kHz |
| IC Case / Package | HSOIC |
| No. of Pins | 8Pins |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 125°C |
| Supply Voltage Min | 4.5V |
| Supply Voltage Max | 5.5V |
| CMRR | 86dB |
| Gain | Resistor Set |
| IC Mounting | Surface Mount |
| Product Range | - |
| Qualification | - |
| MSL | MSL 1 - Unlimited |
| SVHC | No SVHC (04-Feb-2026) |
| Input Offset Voltage | 480µV |
| No. of Amplifiers | 1 Amplifier |
| Input Bias Current | 175µA |
| Amplifier Case Style | HSOIC |
| Bandwidth | 230kHz |
| Automotive Qualification Standard | - |
Aperçu du produit
The MAX9920ASA+T is a precision unidirectional/bidirectional current sense amplifier in 8 pin NSOIC-EP package. This single supply, high accuracy current sense amplifier has high input common mode range that extends from -20V to +75V. It is well suited for current monitoring of inductive loads such as motors and solenoids where common mode voltages can become negative due to inductive kickback, reverse battery conditions or transient events. The MAX9920 has adjustable gain set by an external resistive divider network. It attenuates input signal by a factor of 4 at input level shifting stage allowing device to sense voltages up to 200mV (unidirectional) or ±100mV (bidirectional). It is used in high and low side precision current sensing, super capacitor charge/discharge and precision high voltage current monitoring applications, H-bridge motor current sensing, solenoid current sensing, current monitoring of inductive loads.
- Supply voltage range from 4.5V to 5.5V
- Automotive temperature range from -40°C to 125°C
- Small signal -3dB bandwidth of 230KHz (VSENSE = 50mV) and slew rate of 1.5V/μs
- Supports wide range of precision AC and DC current sensing applications
- Gain error of ±0.29% at TA = +25°C (VRS+ = VRS- =+14V), minimum adjustable gain of 7.5V/V
- Input offset voltage of ±0.48mV at TA = +25°C (VRS+ = VRS- = +14V, VREFIN = 0V)
- Rail to rail output, reference input for bidirectional OUT
- CMRR of 86dB (20V ≤ VCM ≤ +75V) and PSRR of 100dB (4.5V ≤ VCC ≤ 5.5V)
- Input offset current of ±8μA and input bias current of ±175μA at TA = +25°C
- Operates as unidirectional amplifier when VREFIN=GND and bidirectional amplifier when VREFIN=VCC/2
- Automotive; Current Monitoring of Inductive Loads; H-Bridge Motor Current Sensing; High- and Low-Side Precision Current Sensing;
- Precision High-Voltage Current Monitoring; Solenoid Current Sensing; Super-Capacitor Charge/Discharge Monitoring
Remarques
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Spécifications techniques
| Current Sense Amplifier Type | High Side, Low Side |
|---|---|
| IC Case / Package | HSOIC |
| Operating Temperature Min | -40°C |
| Supply Voltage Min | 4.5V |
| CMRR | 86dB |
| IC Mounting | Surface Mount |
| Qualification | - |
| SVHC | No SVHC (04-Feb-2026) |
| No. of Amplifiers | 1 Amplifier |
| Amplifier Case Style | HSOIC |
| Automotive Qualification Standard | - |
| Gain Bandwidth Product | 230kHz |
|---|---|
| No. of Pins | 8Pins |
| Operating Temperature Max | 125°C |
| Supply Voltage Max | 5.5V |
| Gain | Resistor Set |
| Product Range | - |
| MSL | MSL 1 - Unlimited |
| Input Offset Voltage | 480µV |
| Input Bias Current | 175µA |
| Bandwidth | 230kHz |
Documents techniques (1)
Produits de remplacement pour MAX9920ASA+T
1 produit trouvé
Produits associés
1 produit trouvé
Législation et Questions environnementales
| US ECCN: | EAR99 |
|---|---|
| EU ECCN: | Unknown |
| Conforme RoHS : | Oui RoHS |
| Conforme à la norme RoHS Phthalates: | Oui RoHS |
| SVHC : | No SVHC (04-Feb-2026) |
| Télécharger le certificat de conformité du produit | Certificat de conformité du produit |
