Imprimer la page
FT234XD-R
Interface Bridges, USB to UART, 2.97 V, 5.5 V, DFN-EP, 12 Pins, -40 °C
L'image a des fins d'illustration uniquement. Veuillez lire la description du produit.
FabricantFTDI
Réf. FabricantFT234XD-RCopie
Délai d’approvisionnement standard du fabricant42 semaines
Code Commande
Mise en bobine53X3171
Bandes découpées53X3171
Gamme de produitUSB to UART Interface
Votre numéro de pièce
12 392 En Stock
Options de conditionnement
| Type de conditionnement | Quantité | PU HT: | Total |
|---|---|---|---|
| Bandes découpées | 1 | 4,660 $ | 4,66 $ |
| Total Prix | 4,66 $ | ||
Bandes découpées & Mise en bobine
| Quantité | Prix |
|---|---|
| 1+ | 4,660 $ |
| 10+ | 4,650 $ |
| 25+ | 4,600 $ |
| 50+ | 4,490 $ |
| 100+ | 4,370 $ |
| 250+ | 4,270 $ |
| 500+ | 3,900 $ |
| 1000+ | 3,800 $ |
Note à la ligne
Ajouté à votre confirmation de commande, à votre facture et à votre note d’expédition pour cette commande uniquement.
Informations produit
FabricantFTDI
Réf. FabricantFT234XD-RCopie
Délai d’approvisionnement standard du fabricant42 semaines
Code Commande
Mise en bobine53X3171
Bandes découpées53X3171
Gamme de produitUSB to UART Interface
Fiche technique
Bridge TypeUSB to UART
Supply Voltage Min2.97V
Supply Voltage Max5.5V
Interface Case StyleDFN-EP
IC Case / PackageDFN
No. of Pins12Pins
Operating Temperature Min-40°C
Operating Temperature Max85°C
Product RangeUSB to UART Interface
Qualification-
SVHCNo SVHC (25-Jun-2025)
Aperçu du produit
The FT234XD-R is an USB2.0 Full Speed IC, offers a basic UART to USB bridge. The device is an UART, capable of operating up to 3Mbaud, with low power consumption (8mA). The FT234XD-R includes the complete FT-X series feature set, including battery charging detection and enables USB to be added into a system design quickly and easily over a UART interface.
- Single Chip USB to Asynchronous Serial Data Transfer Interface
- Entire USB Protocol Handled on Chip, No USB Specific Firmware Programming Required
- Fully Integrated 2048-byte EEPROM for Storing Device Descriptors and CBUS I/O Configuration
- Fully Integrated Clock Generation with no external crystal required + Optional clock o/p selection
- Data Transfer Rates from 300 Baud to 3Mbaud
- 512-byte Transmit and Receive Buffer utilising buffer smoothing technology for high data throughput
- Royalty-free VCP and Direct (D2XX) drivers eliminate requirement for USB driver development
- Configurable CBUS I/O Pins
- Transmit and Receive LED Drive Signals
- UART Interface Support for 7 or 8 Data Bits, 1 or 2 Stop Bits and Odd/Even/Mark/Space/No Parity
- Synchronous and Asynchronous Bit Bang Interface Options with RD# and WR# Strobes
- Battery Charger Detection, presence of a charger on USB port to enable faster charging of Batteries
- Device Supplied Pre-programmed with Unique USB Serial Number
- Supports Bus Powered, Self-powered and High-power Bus Powered USB Configurations
- Integrated +3.3V Level Converter for USB I/O
- True 3.3V CMOS drive output and TTL input (Operates down to 1V8 with external pull up)
- Configurable I/O Pin Output Drive Strength
- Integrated Power-on-reset Circuit
- UART Signal Inversion Option
- Internal 3.3/1.8V LDO Regulators
Spécifications techniques
Bridge Type
USB to UART
Supply Voltage Max
5.5V
IC Case / Package
DFN
Operating Temperature Min
-40°C
Product Range
USB to UART Interface
MSL
MSL 3 - 168 hours
Supply Voltage Min
2.97V
Interface Case Style
DFN-EP
No. of Pins
12Pins
Operating Temperature Max
85°C
Qualification
-
SVHC
No SVHC (25-Jun-2025)
Documents techniques (2)
Produits associés
3 produit(s) trouvé(s)
Législation et Questions environnementales
US ECCN:EAR99
EU ECCN:Unknown
Conforme RoHS :Oui
RoHS
Conforme à la norme RoHS Phthalates:Oui
RoHS
SVHC :No SVHC (25-Jun-2025)
Télécharger le certificat de conformité du produit
Certificat de conformité du produit