Imprimer la page
BTS5016SDAAUMA1
Power Load Switch, SIPMOS Technology, High Side, Active High, 1 Output, 20V, 5.5A, TO-252-5
L'image a des fins d'illustration uniquement. Veuillez lire la description du produit.
FabricantINFINEON
Réf. FabricantBTS5016SDAAUMA1Copie
Délai d’approvisionnement standard du fabricant21 semaines
Code Commande47W3403
Votre numéro de pièce
31 815 En Stock
| Quantité | Prix |
|---|---|
| 1+ | 3,830 $ |
| 10+ | 2,870 $ |
| 100+ | 2,360 $ |
| 500+ | 2,170 $ |
| 1000+ | 2,130 $ |
| 2500+ | 2,090 $ |
| 5000+ | 2,040 $ |
Prix pour :Each
Minimum: 1
Multiple: 1
3,83 $
Note à la ligne
Ajouté à votre confirmation de commande, à votre facture et à votre note d’expédition pour cette commande uniquement.
Informations produit
FabricantINFINEON
Réf. FabricantBTS5016SDAAUMA1Copie
Délai d’approvisionnement standard du fabricant21 semaines
Code Commande47W3403
Fiche technique
Power Load Switch TypeHigh Side
No. of Channels1Channels
Input Voltage20V
Current Limit5.5A
On State Resistance0.021ohm
IC Case / PackageTO-252 (DPAK)
No. of Pins5Pins
Thermal ProtectionYes
On / Enable Input PolarityActive High
No. of Outputs1Outputs
Operating Temperature Min-40°C
Operating Temperature Max150°C
QualificationAEC-Q100
Product Range-
SVHCNo SVHC (25-Jun-2025)
Automotive Qualification StandardAEC-Q100
Distribution Switch Case StyleTO-252 (DPAK)
Aperçu du produit
BTS5016SDAAUMA1 is a PROFET™, one-channel smart high-side power switch. The power transistor is built by an N-channel vertical power MOSFET with a charge pump. The design is based on Smart SIPMOS chip-on-chip technology. It has a current-controlled input and offers diagnostic feedback with load current sense and a defined fault signal in case of overload operation, overtemperature shutdown and/or short circuit shutdown.
- Part of scalable product family, load current sense, Reversave™
- Very low standby current, current controlled input pin
- Improved electromagnetic compatibility (EMC)
- Fast demagnetization of inductive loads, stable behavior at under-voltage
- AEC qualified
- Supply voltage range from 5.5 to 20V (VIN = 0V, Vbb = 12 V, Tj = -40 to 150°C)
- Operating current is 1.4mA typ (Vbb = 12V, Tj = -40 to 150°C)
- Output clamp is 42V typ (IL = 40mA, Tj = 25°C)
- Slew rate on 25% to 50% VOUT is 0.3V/µs typ (RL = 2.2ohm, Vbb = 12V, Tj = -40 to 150°C)
- PG-TO252-5-11 package, junction temperature range from -40 to 150°C
Spécifications techniques
Power Load Switch Type
High Side
Input Voltage
20V
On State Resistance
0.021ohm
No. of Pins
5Pins
On / Enable Input Polarity
Active High
Operating Temperature Min
-40°C
Qualification
AEC-Q100
MSL
MSL 3 - 168 hours
Automotive Qualification Standard
AEC-Q100
No. of Channels
1Channels
Current Limit
5.5A
IC Case / Package
TO-252 (DPAK)
Thermal Protection
Yes
No. of Outputs
1Outputs
Operating Temperature Max
150°C
Product Range
-
SVHC
No SVHC (25-Jun-2025)
Distribution Switch Case Style
TO-252 (DPAK)
Documents techniques (2)
Produits associés
1 produit trouvé
Législation et Questions environnementales
US ECCN:EAR99
EU ECCN:Unknown
Conforme RoHS :Oui
RoHS
Conforme à la norme RoHS Phthalates:Oui
RoHS
SVHC :No SVHC (25-Jun-2025)
Télécharger le certificat de conformité du produit
Certificat de conformité du produit